Unicorn Horn Build Guide
Unicorn horn components
The Unicorn horn consists of five parts.
Horn parts layout
Inserting the Blink RGB LED
A Blink RGB LED was placed inside the hollow horn after removing its plastic shell.
Blink RGB LED inserted into the horn cavity
The parts were assembled in order using super glue, which means they are difficult to separate once bonded.
A space was left at the back of the horn for the cable to exit.
Since the Unicorn horn needs to allow light to pass through translucently, the infill and material must be chosen appropriately when 3D printing. (Infill 20%, NFC Nylon)
Closing
While no other team may use the exact same files, the design and printing files are shared below.
STL files have been designed and uploaded in 10°, 20°, and 30° variants to allow adjustment of the forward angle of the horn. (Default: 20°)
SLDPRT Files:
- horn_top_1_v3.SLDPRT
- horn_top_2_v3.SLDPRT
- horn_under_1_v3.SLDPRT
- horn_under_2_v3.SLDPRT
- horn_under_3_v3.SLDPRT
STL Files: